This site is optimized to run in horizontal view. Please rotate your device before continuing.
Whitney Lee
Whitney Lee
Inbound Marketing Specialist

Common Food Industry Cleaning Problems Solved

The goal of any good sanitation plan is to minimize cross-contamination and cross-contact through better hygiene and cleaning practices. But—what happens when workers can’t feasibly reach that tall ceiling fixture or get a brush to follow the curves of a spiraling pipe? If employees don’t have the right tools for the job, they’ll end up improvising sub-par solutions, or—even worse—they just won’t clean that area.

Here are some examples of specialty tools solving common cleaning problems in food processing plants:

High walls

Standard handles just aren’t going to reach all the way up a factory’s walls. Use a telescopic handle to clean walls top-to-bottom. Because they’ll need to be adjusted many times, handles should be easy to extend and shorten. Ideally, they should also be hollow to minimize weight for worker comfort and to make the handles easier to control at longer lengths.

Ceiling and pipe condensation

Sometimes handled by makeshift tools like a sock on a telescopic pole, cleaning condensation is vital to food safety and deserves its own tool. Condensation dripping into food or processing equipment can lead to microbial cross-contamination and a costly recall. Use a condensation squeegee to prevent drops from forming and falling into products. A condensation squeegee catches and drains water from overhead into either tubing or bottles to keep products safe.

Large tanks

Specially designed tank brushes have curved heads to reach every angle. When combined with an easy-to-use telescopic handle, workers can reach to clean the tops, sides, and bottoms of tanks, all without having to pull out a cumbersome ladder.

Long pipes

Pipe brushes need to be the right diameter to reach the interior walls, but they also have to be the right length to reach through the pipe, or debris will build up just out of reach. Remco offers pipe brushes on stainless steel handles that can be lengthened again and again with 30-inch extenders to reach through the longest pipes.

Curved or helical pipes

Stainless steel handles are flexible, but only to a degree. For truly helical pipes, a nylon handle will follow all of its curves while being strong enough to get the pipe walls clean. Nylon is FDA-approved for food contact and can follow through even the most spiraling pipes.

Overhead pipes

Condensation isn’t the only worry when it comes to overhead pipes. These surfaces are often repositories for dirt and contaminants since workers have a hard time reaching around and over them to clean. Use an overhead adjustable-neck brush to get them clean. The brush should have a flexible head to reach over and on the side of pipes. An adjustable neck will allow workers to reach pipes at any angle. Combined with a telescopic handle, an overhead brush is especially useful for reaching high pipes.

Machinery with blades

Though ideally most bladed machinery like bowl cutters are disassembled for cleaning, often this isn’t the case. A brush with a hand guard to help protect workers allows dangerous machinery to be cleaned in place more frequently.

Cross-contamination and allergen cross-contact can both be prevented by better hygiene practices. When you’re able to fully clean your facility, you’re able to control the spread of contaminants. These tools can help solve your common cleaning problems.